[1]典型值是指实验室平均数据，仅用于使用时的参考，不作为产品使用的标准。

Typical values is the average laboratory data, for use reference,only not as a product standards.

以上数值仅供注塑机参考使用，可根据不同机型、不同模具以及产品要求，对上述参数做适当调整。

The above-mentioned data is for injection reference, should adjust according to the difference of the machines andmolds and the specific requirement of the products.

使用前应检查其包装在运输过程中是否破损。物料应储存在阴凉干燥处，一旦破袋使用结束，应将剩余物料密封保存。

Before use, the packaging should be checked for damage during transportation. Materials should be stored in a cool and dry place. Once the bag is broken and used, the remaining materials should be sealed and stored.